Help / Installation Guide

EXTENDER BARS
INSTALLATION GUIDE.

Extra grip for when you are really stuck how and when to use your TruckClaws™ extender bars.

01 · Usage

How To Use Extender Bars.

Extender bars are useful when you are really stuck and need additional grip. If your truck is dug in very deep and essentially stuck on high center extender bars can also help get you out.

Laying a log or tree limb parallel to the tire and then having the extender bar come down on it slowly can lift you out. Extender bars are intended for use when stuck in deep mud or even sand.

To use your extender bars you simply slide them into the traction cleat until they are stopped by the pre-installed set screws.

02 · Important

Two Cautions.

Not For Snow

We do not recommend use in the snow as it is possible that the extender bar can come loose from the cleat and get lost in deep snow!

Rear Drive Wheels Only

We strongly advise ONLY using extender bars on your rear drive wheels so there are no issues with clearance.

Safety First

Emergency Use Only.

TruckClaws are emergency traction aid devices designed to be removed immediately after use. Follow the installation instructions closely, go slow and always test them out first.

More Guides

Other Installation Guides.

TruckClaws II

TruckClaws II™ Installation Guide

Commercial

TruckClaws™ Commercial Guide

Help

Frequently Asked Questions